- SKF Wheel Bearings DEVELOP MFG.CORP.
- 110x240x50 Bearing 110x60x22 Bearing 170x260x90 Bearing
Home>Products>50x80x16 Bearing>50,000 mm x 80,000 mm x 16,000 mm SNR 6010E deep groove ball bearings
English
50,000 mm x 80,000 mm x 16,000 mm SNR 6010E deep groove ball bearings
What are the dimensions of 50,000 mm x 80,000 mm x 16,000 mm a SKF Wheel Bearings DEVELOP MFG.CORP. 50,000 mm x 80,000 mm x 16,000 mm SNR 6010E deep groove ball bearings? 0.020 in misalignment tolerance: 50x80x16 Bearing Manufacturing Service . Get Your Free, Instant Quote！
- SNR
6010E
- 7.3125 in
- 8.4380 in
- 0.020 in
- 12000 fpm
- 8487900040.US
- Ambient
- 0.6250 in
- Exceptional Bearing
-
SKF Wheel Bearings DEVELOP MFG.CORP.2020-07-10 09:46:19
Welcome to my shop! Glad to serve you! Please send your question!
50,000 mm x 80,000 mm x 16,000 mm SNR 6010E deep groove ball bearings Systems
| shaft diameter:: | 7.3125 in | D: | 8.4380 in | misalignment tolerance:: | 0.020 in |
| maximum shaft surface speed:: | 12000 fpm | harmonization code:: | 8487900040.US | pressure tolerance:: | Ambient |
| width:: | 0.6250 in | typical application:: | Exceptional Bearing | continuous temperature range:: | -22 to 400°F |
| manufacturer catalog number:: | 29619-1986 | Size (mm): | 50,000 mm x 80,000 mm x 16,000 mm |
50,000 mm x 80,000 mm x 16,000 mm SNR 6010E deep groove ball bearings Products and services
SNR 6010E bearing Size Chart (mm/inches) | |
|---|---|
| Bearing number | 7024 ACE/HCP4AL |
| Size (mm) | 180x120x28 |
| Bore Diameter (mm) | 180 |
| Outer Diameter (mm) | 120 |
| Width (mm) | 28 |
| d | 120 mm |
| D | 180 mm |
| B | 28 mm |
| d1 | 141.42 mm |
| d2 | 137.8 mm |
| D1 | 158.61 mm |
| b | 2.8 mm |
| C1 | 15 mm |
| C2 | 5.4 mm |
| C3 | 5.4 mm |
| r1,2 - min. | 2 mm |
| r3,4 - min. | 1 mm |
| a | 49.3 mm |
| da - min. | 128.8 mm |
| db - min. | 128.8 mm |
| Da - max. | 171.2 mm |
| Db - max. | 174.4 mm |
| ra - max. | 2 mm |
| rb - max. | 1 mm |
| dn | 144.9 mm |
| Basic dynamic load rating - C | 54 kN |
| Basic static load rating - C0 | 52 kN |
| Fatigue load limit - Pu | 1.8 kN |
| Limiting speed for grease lubrication | 10000 r/min |
| Limiting speed for oil lubrication | 15500 mm/min |
| Ball - Dw | 14.288 mm |
| Ball - z | 29 |
| Gref | 28 cm3 |
| Calculation factor - e | 0.68 |
| Calculation factor - Y2 | 0.87 |
| Calculation factor - Y0 | 0.38 |
| Calculation factor - X2 | 0.41 |
| Calculation factor - Y1 | 0.92 |
| Calculation factor - Y2 | 1.41 |
| Calculation factor - Y0 | 0.76 |
| Calculation factor - X2 | 0.67 |
| Preload class A - GA | 490 N |
| Preload class B - GB | 1480 N |
| Preload class C - GC | 2950 N |
| Calculation factor - f | 1.12 |
| Calculation factor - f1 | 0.99 |
| Calculation factor - f2A | 1 |
| Calculation factor - f2B | 1.03 |
| Calculation factor - f2C | 1.06 |
| Calculation factor - fHC | 1.01 |
| Preload class A | 288 N/micron |
| Preload class B | 433 N/micron |
| Preload class C | 568 N/micron |
| d1 | 141.42 mm |
| d2 | 137.8 mm |
| D1 | 158.61 mm |
| C1 | 15 mm |
| C2 | 5.4 mm |
| C3 | 5.4 mm |
| r1,2 min. | 2 mm |
| r3,4 min. | 1 mm |
| da min. | 128.8 mm |
| db min. | 128.8 mm |
| Da max. | 171.2 mm |
| Db max. | 174.4 mm |
| ra max. | 2 mm |
| rb max. | 1 mm |
| dn | 144.9 mm |
| Basic dynamic load rating C | 54 kN |
| Basic static load rating C0 | 52 kN |
| Fatigue load limit Pu | 1.8 kN |
| Attainable speed for grease lubrication | 10000 r/min |
| Attainable speed for oil-air lubrication | 15500 r/min |
| Ball diameter Dw | 14.288 mm |
| Number of balls z | 29 |
| Reference grease quantity Gref | 28 cm³ |
| Preload class A GA | 490 N |
| Static axial stiffness, preload class A | 288 N/µm |
| Preload class B GB | 1480 N |
| Static axial stiffness, preload class B | 433 N/µm |
| Preload class C GC | 2950 N |
| Static axial stiffness, preload class C | 568 N/µm |
| Calculation factor f | 1.12 |
| Calculation factor f1 | 0.99 |
| Calculation factor f2A | 1 |
| Calculation factor f2B | 1.03 |
| Calculation factor f2C | 1.06 |
| Calculation factor fHC | 1.01 |
| Calculation factor e | 0.68 |
| Calculation factor (single, tandem) Y2 | 0.87 |
| Calculation factor (single, tandem) Y0 | 0.38 |
| Calculation factor (single, tandem) X2 | 0.41 |
| Calculation factor (back-to-back, face-to-face) Y1 | 0.92 |
| Calculation factor (back-to-back, face-to-face) Y2 | 1.41 |
| Calculation factor (back-to-back, face-to-face) Y0 | 0.76 |
| Calculation factor (back-to-back, face-to-face) X2 | 0.67 |
| Mass bearing | 1.96 kg |
50,000 mm x 80,000 mm x 16,000 mm SNR 6010E deep groove ball bearings Cad Models
Contact Us
- SKF Wheel Bearings DEVELOP MFG.CORP.
- AddressWinona Avenue, Schiller Park
- Phone(Working Time)+1-847-697-5449
- Fax
Related News
| Does a bad wheel bearing always have play? |
| How do you identify a bearing? |
| What is a cross roller bearing? |
Product Categories
- 110x240x50 Bearing
- 110x60x22 Bearing
- 170x260x90 Bearing
- 17x30x14 Bearing
- 17x40x12 Bearing
- 180x280x74 Bearing
- 190x400x132 Bearing
- 200x420x138 Bearing
- 30x47x22 Bearing
- 4x9x4 Bearing
- 50x80x16 Bearing
- 50x90x20 Bearing
- 6.35x15.875x4.978 Bearing
- 630x920x212 Bearing
- 65x140x33 Bearing
- 65x85x10 Bearing
- 90x190x43 Bearing
- SKF 7311 Bearing
- Ge17es Bearing
- SKF 3203 Bearing
- 6303 2rs SKF Bearing
New Products
50 mm x 80 mm x 16 mm FBJ 6010 deep groove ball bearings
50 mm x 80 mm x 16 mm Loyal 6010-2RS deep groove ball bearings
50,000 mm x 80,000 mm x 16,000 mm NTN 6010LLBNR deep groove ball bearings
50 mm x 80 mm x 16 mm SNR ML7010CVUJ74S angular contact ball bearings
50 mm x 80 mm x 16 mm FAG 6010 deep groove ball bearings